Ricoh D009 Service Manual page 182

Fusing
Installing a new web holder roller
The holder [A] has a one-way clutch. Make sure that the holder [A] is set at the front side.
Installing new web rollers
1. Install the web supply roller [A] first (
pin [B].
2. Install the web take up roller [C] (
outside the web take up roller.
3. Reinstall the rear gear bracket ( Section 3.11.4 "Web Holder Roller and Web Rollers").
4. Reinstall the front and rear gears and bushings ( Section 3.11.4 "Web Holder Roller
and Web Rollers").
5. Reinstall the rear gear bracket ( Section 3.11.4 "Web Holder Roller and Web Rollers").
D009/D011/D012/D013
). Make sure that the web sheet is under the
). Make sure that the printed number [D] is
3-52 SM