Ricoh D009 Service Manual page 334

SP4-xxx: Scanner-1
002 Address Setting
003 Data Setting
4603 AGC Execution
002 HP Detection Enable
003 HP Detection Disable
FGATE Open/Close
Opens or closes the FGATE signal. This SP automatically returns to the
4604
default status (close) after exiting this SP.
[0 to 1 / 0 / 1]
0: OFF, 1: ON
Scanner Adjustment
4605
Use these SP codes to 1) display the status of the white level peak
adjustment for the SBU, and 2) do the adjustment manually.
Flag Display
001* Displays the status of standard white plate density adjustment.
[0 to 1 / 0 / 1 ]
0: Not adjusted, 1: Adjusted
Start
Sets the machine in the standard white plate density adjustment mode (a
message is displayed on the LCD).
002
[0 to 1 / 0 / 1 ]
0: Off, 1: On
Place a T6200 text chart on the exposure glass and press "
white level peak density adjustment with the standard white plate. After
D009/D011/D012/D013
SBU registers.
Not used
Executes the AGC with the scanner detection.
Executes the AGC with the scanner detection.
5-48
" to do the
SM