Ricoh D009 Service Manual page 141

6. Disconnect the connector [E] (
7. Remove the clamp [F] (
8. Remove the pulley [G].
9. Release the cable clamp [H].
10. Hold down the snap [I], and then slide the exposure lamp [J] to the front side.
11. Exposure lamp [J]
Monochrome Scanner Model
1. Operation panel with scanner front cover ( Section 3.3.5 "Operation Panel")
2. Exposure glass ( Section 3.4.1 "Exposure Glass")
3. Rear cover ( Section 3.3.3 "Rear Cover")
4. Scanner rear frame ( Section 3.4.4 "Scanner Motor")
5. Disconnect the exposure lamp cable from the lamp stabilizer (
6. Do steps 7 to 11 in the "Color Scanner Model" described above.
SM
x 1).
x 1)
3-11
Scanner -1
x 1, x 2).
D009/D011/D012/D013