Ricoh D009 Service Manual page 221

Registration: Platen Mode
1. Place the test chart on the exposure glass and make a copy from one of the feed
stations.
2. Check the leading edge [A] and side-to-side [B] registration, and adjust them with the
following SP modes if necessary.
Leading Edge
Side-to-side
Magnification
Use the S5S test chart to perform the following adjustment.
Sub Scan Magnification
SM
SP No.
SP4-010-1 0 ±2.0 mm
SP4-011-1 0 ±2.5 mm
3-91
Copy Adjustments
Specification
D009/D011/D012/D013