Ricoh D009 Service Manual page 403

0 x 0F - 36M Fix
0 x 0E - 18M Fix
0 x 0D - 12M Fix
0 x 0B - 9M Fix
0 x 0A - 6M Fix
WEP Key Select
Selects the WEP key.
Bit 1 and 0
011
00: Key1, 01: Key2 (Reserved),
10: Key3 (Reserved), 11: Key4(Reserved)
This SP is displayed only when the IEEE802.11 card is installed.
Fragment Thresh
042 Adjusts the fragment threshold for the IEEE802.11 card.
[256 to 2346 / 2346 / 1]
This SP is displayed only when the IEEE802.11 card is installed.
11g CTS to self
043 Determines whether the CTS self function is turned on or off.
[0 to 1 / 1 / 1] 0: Off, 1: On
This SP is displayed only when the IEEE802.11 card is installed.
11g Slot Time
044 Selects the slot time for IEEE802.11.
[0 to 1 / 0 / 1] 0: 20 μm, 1: 9 μm
This SP is displayed only when the IEEE802.11 card is installed.
WPA Debug Lvl
045 Selects the debug level for WPA authentication application.
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the IEEE802.11 card is installed.
SM
0 x 13 - 0 x FE (reserved)
0 x 12 - 72M (reserved)
0 x 09 - 22M (reserved)
5-117
SP5-xxx: Mode-3
D009/D011/D012/D013