Ricoh D009 Service Manual page 416

SP5-xxx: Mode-4
003 Total Counter
5850* Address Book Function Japan Only
Replacement of Circuit Classification
The machine is sold ready to use with a G3 line. This SP allows you to
003
switch all at once to convert to G4 after you add a G4 line. Conversely, if for
some reason the G4 line becomes unusable, you can easily switch back to
G3.
Bluetooth
5851*
Sets the operation mode for the Bluetooth Unit. Press either key.
[0: Public] / [1: Private]
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM
onto the hard disk. Then these stamps can be used by the system. If this is
5853
not done, the user will not have access to the fixed stamps ("Confidential",
"Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting
the HDD. Always switch the machine off and on after executing this SP.
Remote ROM Update
5856
When set to "1" allows reception of firmware data via the local port (IEEE
1284) during a remote ROM update. This setting is reset to zero after the
D009/D011/D012/D013
[0 to 1 / 1 / -]
0: OFF (No Print)
1: ON (Print)
When the total number of pages that are made reaches
this value, the current date becomes the 'official'
installation date for this machine.
[0 to 99999999 / 0 / 1]
5-130 SM