Ricoh D009 Service Manual page 832

5. Install the core [4] (RFC-9) to the
operation panel I¥F cable, ring
core [5] (TFCM-41-27-16) to the
bound cables and the cores [6]
(RFC-13) to the other cables.
6. Install the ARDF [7] or platen cover
on the scanner unit (stud screw x
2).
7. Connect the ARDF I/F cable [8] to
the connector of the scanner unit.
8. Install the right and left stoppers [9]
to the ARDF hinges (
screw-tapping M3x16).
B838
x 2 each;
24
Harness Bracket Attachment Procedure
B838R938.PNG
B838R939.PNG
B838R940.PNG
SM