Ricoh D009 Service Manual page 308

SP2-xxx: Drum-1
LD Power Adjustment
2105*
Adjusts the LD power for each mode.
Each LD power setting is decided by the process control.
001 LD1: Copy
002 LD2: Copy
003 LD1: Printer/Fax
004 LD2: Printer/Fax
POL REV TIME (Polygon motor rotation time)
2106*
PRE TIME
001
Adjusts the time of polygon motor rotation before a job.
If this is set to "0", this SP is not activated.
POST TIME
Adjusts the time of the polygon motor rotation after a job.
002
If this is set to "0", the polygon motor never switches off in standby mode.
However, if the machine enters the energy saver mode, the polygon motor
will ignore the zero setting and switch itself off.
2109 Test Pattern
001 Pattern Selection
0: None
1: Vertical Line (1 dot)
2: Vertical Line (2 dot)
3: Horizontal Line (1 dot)
4: Horizontal Line (2 dot)
5: Grid Vertical Line
6: Grid Horizontal Line
D009/D011/D012/D013
[–50 to 79 / -24 (C1b), 5 (C1c) /1 ]
[–50 to 79 / -44 (C1b), -25 (C1c)/1 ]
[0 to 60 / 10 /1 sec]
[0 to 60 / 0 /1 sec]
[0 to 24 / 0 /1 ]
Test pattern of the GAVD
13: Independent Pattern (3 dot)
14: Trimming Area
15: Hound's Tooth Check (Vertical)
16: Hound's Tooth Check (Horizontal)
17: Black Band (Horizontal)
18: Black band ( Vertical)
19: Checker Flag Pattern
5-22 SM