Ricoh D009 Service Manual page 295

034 Feed Wait: Center Minus: Thick 2
035 Feed Wait: Ends Minus: Thick 2
036 Feed Wait: Center Minus: Thin
037 Feed Wait: Ends Minus: Thin
038 Feed Waiting: Maximum Time
1106 Fusing Temperature Display
001 Roller Center
002 Roller Ends
003 Machine Inside at Power On
004 Machine Inside
Fusing Nip Band Check
1109*
Checks the fusing nip band.
001 Execution
Idling Rotation Time
002
Specifies the fusing rotation time before executing SP1109-001.
Pre-Idling Time
003
Specifies the time that the paper stops in the fusing unit for measuring the
nip.
SM
Sets the maximum feed waiting time.
[0 to 30 / 0 / 1 sec]
The paper is fed when the time specified
with this SP has passed even though the
fusing temperature has not reached the
prescribed temperature.
0: Disabled.
Displays the temperature of the fusing
unit.
[-20 to 250 / 0 / 1 deg]
Displays the temperature inside the
machine.
[-20 to 250 / 0 / 1 deg]
[0 to 120 / 60 / 1 sec]
[5 to 30 / 10 / 1 sec]
5-9
SP1-xxx: Feed-1
D009/D011/D012/D013