Sp2-Xxx: Drum-2 - Ricoh D009 Service Manual

SP2-xxx: Drum-2

5.6 SP2-XXX: DRUM-2
2309* Current: Paper Size Correction
Paper Lower Width (a)
Adjusts the lower paper width threshold for the transfer current, charge
voltage, and development bias corrections.
001
Use this SP when an image problem (e.g., insufficient toner transfer) occurs
with a small width paper. If the paper width is smaller than this value, the
transfer current will be multiplied by the factor in SP2-309-3 (paper tray) or
SP2-309-5 (by-pass).
Paper Upper Width (b)
Adjusts the upper paper width threshold for the transfer current, charge
002
voltage, and development bias corrections.
As for SP2-309-1, but the factors are in SP2-309-4 (paper tray) and
SP2-309-6 (by-pass).
Paper Tray: Plain (alpha)
003
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-1.
Paper Tray: Plain (beta)
004
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-2.
By-pass: Plain (gamma)
005
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-1.
By-pass: Plain (delta)
006
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-2.
007 Paper Tray: Thick 1 (alpha)
008 Paper Tray: Thick 1 (beta)
D009/D011/D012/D013
[1 to 150 / 150 / 1 mm ]
[151 to 296 / 216 / 1 mm ]
[1 to 3 / 1 / 0.1 ]
[1 to 3 / 1 / 0.1 ]
[1 to 3 / 1.1 / 0.1 ]
[1 to 3 / 1.1 / 0.1 ]
[1 to 3 / 1 / 0.1 ]
5-28 SM