Td Sensor - Ricoh D009 Service Manual

3.8.4 TD SENSOR

1. PCDU ( Section 3.7.1 "PCDU (Photoconductor and Development Unit)")
2. Empty all developer from the development unit. ( Section 3.8.3 "Developer")
3. Seal
4. TD sensor [A] ( x1)
The TD sensor is attached to the casing with double-sided tape [B]. Pry it off
with the flat head of a screwdriver. Use fresh double-sided tape to re-attach the
sensor.
5. Pour new developer into the development unit and perform the TD sensor initial setting
using SP2-801.
When performing the TD sensor initial setting, cover the toner entrance hole
with a piece of paper.
SM 3-39
Development
D009/D011/D012/D013