2.
Toner cap [A]
3.
Insert cap [A] into the opening of the PCDU [B].
Make sure that the cap is inserted completely into the opening.
4.
Remove the spring [C] on the rear side of the PCDU.
5.
Remove the spring [D] on the front side of the PCDU and attach it to the hooks as
shown.
To prevent breaking the weaker hook
disconnect the spring at
When you move this spring, this retracts the movable drum cleaning blade so that it
does not touch the surface of the drum when the drum is re-installed.
SM
, use a pair of needle-nose pliers to
, remove the spring, then re-attach to
3-29
PCDU
and
.
D009/D011/D012/D013