Drum Cleaning Blade 2; Drum Cleaning Blade 1 - Ricoh D009 Service Manual

PCDU

3.7.5 DRUM CLEANING BLADE 2

1. Drum ( Section 3.7.2 "Drum")
2. Charge roller and cleaning roller (  Section 3.7.4 "Charge Roller and Cleaning Roller")
3. Remove cleaning blade 2 [A]. (
Re-installation
Engage the left end of the cleaning blade first, then make sure that both arms [B] and
[C] are through the holes on the left and right side.
When you re-attach the snap-ring, make sure that the head of the snap ring [D] is below
the blade.
After re-assembly make sure that the front spring of the movable cleaning blade is
re-attached to the

3.7.6 DRUM CLEANING BLADE 1

1. Drum (  S ection 3.7.2 "Drum")
2. Charge roller and cleaning roller (  Section 3.7.4 "Charge Roller and Cleaning Roller")
3. Drum cleaning blade 2 ( Section3.7.5 "Drum Cleaning Blade 2")
D009/D011/D012/D013
x 1, bushing x 1)
, position. ( Section 3.7.2 "Drum")
3-34 SM