Installation Procedure - Ricoh D009 Service Manual

1.12.2 INSTALLATION PROCEDURE

Unplug the main machine power cord before starting the following procedure. If the
2000/3000-sheet booklet finisher has been installed, disconnect it and pull it away
from the machine.
1. If the finisher is connected to the copier, disconnect the power connector [1] and move
the finisher away from the copier.
2. Remove the rear cover [2] (
At the bottom of the rear cover, make sure to disconnect the tabs that attach
the cover to the frame.
3. Remove the guide plate [3] (
4. Remove the bracket [4] from the punch
unit ( x 3).
SM
x 2) and open the front door.
x 2).
1-45
Punch Unit (B702)
D009/D011/D012/D013