Ricoh D009 Service Manual page 382

SP5-xxx: Mode-3
[0 to 100 / 60 / 1 sec.]
RCG Read Timeout
010 Sets the length of time (seconds) for the timeout when sent data is written from
the RCG during a call over the @Remote network.
[0 to 100 / 60 / 1 sec.]
Port 80 Enable
Controls if permission is given to get access to the SOAP method over Port 80
on the @Remote network.
011
[0 to 1 / 0 / 1]
0: No. Access denied
1: Yes. Access granted.
RCG – C Registed
021 This SP displays the embedded RCG-N installation end flag.
1: Installation completed
2: Installation not completed
RCG – C Registed Detail
This SP displays the RCG device installation status.
022
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Type (N/M)
023 This SP displays and selects the embedded RCG-N connection method.
0: Internet connection
1: Dial-up connection
Cert. Expire Timing (DFU)
061
Proximity of the expiration of the certification.
062 Use Proxy
This SP setting determines if the proxy server is used when the machine
D009/D011/D012/D013 5-96 SM