Ricoh D009 Service Manual page 324

SP3-xxx: Process-1
3902* New PCU Detection (Not used)
On/OFF Setting
001
Turns on or off the new unit detection for the transfer belt unit and fusing
unit.
Hot Roller Stripper Cleaning
3905*
"Cleaning A": 15 sec. off/on cycle for the fusing motor.
"Cleaning B": Off (45 sec.) and On (15 sec.) cycle for the fusing motor.
1st Cleaning: Interval
001 Sets the threshold for the 1st cleaning mode.
"Cleaning A" is done once.
[0 to 5 / 5 / 1 sheets]
1st Cleaning: Mode Setting
002
Sets the number of additional execution times of the 1st cleaning mode.
[0 to 5 / 0 / 1 times]
2nd Cleaning: Interval
003 Sets the threshold for the 2nd cleaning mode.
"Cleaning A" is done twice.
[6 to 49 / 30 / 1 sheets]
2nd Cleaning: Mode Setting
004
Sets the number of additional execution times of the 2nd cleaning mode.
[0 to 5 / 0 / 1 times]
3rd Cleaning: Interval
Sets the threshold for the 3rd cleaning mode.
005
"Cleaning A" is done twice and "Cleaning B" is done "N" times.
"N" is specified with SP3905-006.
[50 to 999 / 100 / 1 sheets]
D009/D011/D012/D013
[0 to 1 / 0 / 1]
0: On, 1: Off
5-38 SM