Ricoh D009 Service Manual page 389

Hide thumbs Also See for D009:
Table of Contents

Advertisement

[1 to 65536 / 60 / 1 /step]
Dial Up User Name
Use this SP to set a user name for access to remote dial up. Follow these rules
when setting a user name:
156
Name length: Up to 32 characters
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Dial Up Password
Use this SP to set a password for access to remote dial up. Follow these rules
when setting a user name:
157
Name length: Up to 32 characters
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Local Phone Number
Use this SP to set the telephone number of the line where embedded RCG-M
161
is connected. This number is transmitted to and used by the Call Center to
return calls.
Limit: 24 numbers (numbers only)
Connection Timing Adjustment Incoming
When the Call Center calls out to an embedded RCG-M modem, it sends a
repeating ID tone (*#1#). This SP sets the time the line remains open to send
these ID tones after the number of the embedded RCG-M modem is dialed up
162
and connected.
[0 to 24 / 1 / 1 /step]
The actual amount of time is this setting + 2 sec. For example, if you set "2",
the line will remain open for 4 sec.
Access Point
163 This is the telephone number of the dial-up access point for embedded
RCG-M. If no setting is done for this SP code, then a preset value (determined
by the country selected) is used.
SM
5-103
SP5-xxx: Mode-3
D009/D011/D012/D013

Advertisement

Table of Contents
loading

This manual is also suitable for:

D011D012D013

Table of Contents