Ricoh D009 Service Manual page 97

5. Pull out tray 2 from the mainframe.
6. Replace the shoulder screw [4] with the washer screw [5], using the securing bracket [6]
( x 1).
7. Connect the harness [7] to the connector [8] of the tray heater.
8. Route the harness [7] as shown and clamp it with four clamps (
9. Connect the harness [7] to the connector [9] of the mainframe.
SM
Tray Heater (Optional Paper Feed Unit)
1-63
x 4).
D009/D011/D012/D013