Sc Tables: Sc8Xx -2 - Ricoh D009 Service Manual

SC Tables: SC8xx -2

4.12 SC TABLES: SC8XX -2
HDD startup error at main power on
HDD is connected but a driver error is detected.
The driver does not respond with the HDD within 30 s.
860 B
HDD is not initialized
Label data is corrupted
Defective HDD
Initialize the HDD with SP5832-001.
HDD re-try failure
At power on, the HDD is detected. Power supply to the HDD is interrupted
after the system has entered the energy save mode, but after the HDD has
been awakened from the energy save mode, it does not return to the ready
861 D
status within 30 sec.
Harness between HDD and controller board disconnected, defective
HDD power connector disconnected
HDD defective
Controller board defective
HDD data read failure
The data written to the HDD cannot be read normally, due to bad sectors
generated during operation.
863 D
HDD defective
Note: If the bad sectors are generated at the image partition, the bad sector
information is written to NVRAM, and the next time the HDD is accessed,
these bad sectors will not be accessed for read/write operation.
864 D HDD data CRC error
During HDD operation, the HDD cannot respond to a CRC error query. Data
D009/D011/D012/D013 4-42 SM