Ricoh D009 Service Manual page 932

Bit Switches
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 [SP No. 1-104-010]
No FUNCTION
0-7 IP-Fax dial interval setting
Communication Switch 0A [SP No. 1-104-011]
No FUNCTION
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
Communication Switch 0B - Not used (do not change the settings)
Communication Switch 0C - Not used (do not change the settings)
Communication Switch 0D [SP No. 1-104-014]
No FUNCTION
The available memory
threshold, below which ringing
0-7 detection (and therefore
reception into memory) is
disabled
D346
COMMENTS
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by
following formula.
[Interval time = specified value with this switch x
0.2 msec]
COMMENTS
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
Do not change the settings.
COMMENTS
00 to FF (Hex), unit = 4 kbytes
(e.g., 06(H) = 24 kbytes)
One page is about 24 kbytes.
The machine refers to this setting before each fax
reception. If the amount of remaining memory is
below this threshold, the machine cannot receive
86 SM