Installation Procedure - Ricoh D009 Service Manual

19 Sheet - Caution: 16 Languages
20 Decal - Caution - Original
21 Sheet - Data (-19, -21, -26, -27, -28, -29)
22 Sheet: NECR

1.3.2 INSTALLATION PROCEDURE

Preliminary Procedures
Put the machine on the paper feed unit or the LCT first if you will install an optional paper
feed unit or the optional LCT at the same time. Then install the machine and other options.
Keep the shipping retainers after you install the machine. You may need them in the
future if you transport the machine to another location.
1. Remove all the tapes and retainers on the machine.
2. Remove all the tapes and retainers in trays 1 and 2, and then take out the power cord
from tray 1 (if applicable).
3. Remove the scanner unit stay [1].
4. Open the front door [2], and then remove the jam location sheet [3].
5. Keep the scanner unit stay [1] inside the front door [2].
6. Reattach the jam location sheet.
7. Close the front door.
SM
Description
1-7
Main Machine Installation
Q'ty
1
1
1
1
D009/D011/D012/D013