Corner Stapling; Stacking And Jogging - Ricoh D009 Service Manual

Hide thumbs Also See for D009:

Table of Contents

Corner Stapling

2.5 CORNER STAPLING

[A]: Jogger Fence Motor (M15)

[B]: Jogger Fences

[C]: Positioning Roller

[D]: Jogger Fence HP Sensor (S15)

[E]: Stapling Edge Pressure Plate Solenoid (SOL4)

[F]: Pressure Plate

At the beginning of the job, the jogger fence motor (M15) [A] switches on and moves the

jogger fences [B] to the standby position (7.5 mm from the sides of the selected paper size).

When each sheet passes the pre-stack tray exit sensor (S2) and enters the stapling tray:

The jogger fence motor switches on and moves the jogger fences to within 5.5 mm of

the sides of the selected paper size.

The positioning roller solenoid (SOL3) switches on for the time prescribed for the paper

Table of Contents

D011 D012 D013