Fusing Entrance Guide Shift Mechanism - Ricoh D009 Service Manual

Image Fusing

6.15.4 FUSING ENTRANCE GUIDE SHIFT MECHANISM

The entrance guide [A] has two holes on each side to adjust for paper thickness to prevent
creasing. Normally, the left screw hole [B] on each side is used.
For thin paper, use screw holes [C] to move the entrance guide to the left. This setting allows
more direct access to the gap between the hot and pressure rollers, and prevents thin paper
from buckling against the hot roller which can cause blurring at the leading edge of the copy.
6.15.5 PRESSURE ROLLER CLEANING
The pressure roller cleaning roller [A], is in constant contact with the pressure roller [B],
collecting toner and paper dust from the surface of the pressure roller.
Because the cleaning roller is metal, it can collect adhering matter better than the pressure
roller, which is coated with Teflon.
D009/D011/D012/D013 6-64 SM