Ricoh D009 Service Manual page 407

Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Delivery Svr.Capability (Ext)
011 These settings are for future use. They will let you increase the number of
registered devices (in addition to those registered for SP5845 010).
There are eight bits (Bit 0 to Bit 7). All are unused at this time.
013 Server Scheme (Primary)
014 Server port Number (Primary)
015 Server URL Path (Primary)
016 Server Scheme (secondary)
017 Server Port (Secondary)
018 Server URL Path (Secondary)
019 Capture Server Port Number
020 Capture Server URL Path
021 Capture Server URL Path
These SPs (5845-013/014/015/016/017/018/019/020/021) listed above are
used for the scan router program.
Rapid Sending Control
022
Enables or disables the prevention function for the continuous data sending
error.
SM
[1 to 65535 / 80 / 1]
[1 to 65535 / 80 / 1]
[1 to 65535 / 80 /1]
[0 to 1 / 0 / -]
0: Disable, 1: Enable
5-121
SP5-xxx: Mode-4
D009/D011/D012/D013