Ricoh D009 Service Manual page 931

Acceptable total error line ratio
1
0: 5% 1: 10%
Treatment of pages received
with errors during G3
reception
2
0: Deleted from memory
without printing
1: Printed
Hang-up decision when a
negative code (RTN or PIN) is
3 received during G3 immediate
transmission
0: No hang-up, 1: Hang-up
4-7 Not used
Communication Switch 03 [SP No. 1-104-004]
No FUNCTION
Maximum number of page
0-7 retransmissions in a G3
memory transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
SM
300 dpi 18(L) 36(H)
400 dpi 24(L) 48(H)
If the error line ratio for a page exceeds the
acceptable ratio, RTN will be sent to the other end.
0: Pages received with errors are not printed.
0: The next page will be sent even if RTN or PIN is
received.
1: The machine will send DCN and hang up if it
receives RTN or PIN.
This bit is ignored for memory transmissions or if
ECM is being used.
Do not change the settings.
COMMENTS
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
85
Bit Switches
D346