Sc Tables: Sc7Xx -2 - Ricoh D009 Service Manual

4.10 SC TABLES: SC7XX -2

1000/2000/3000-sheet (booklet) finisher: Tray lift motor error
The 1st detection failure causes a jam error, and the 2nd failure causes this
750 B
SC code.
The upper tray paper height sensor does not change its status with the
specified time after the tray raises or lowers.
Return roller motor error
This occurs during the operation of the lower tray pressure motor
753 B
Motor harness disconnected, loose, defective
Motor overloaded
Home position sensor harness disconnected, loose, defective
Home position defective
Finisher punch motor error
The punch HP sensor is not activated within the specified time after the
punch motor turned on.
The 1st detection failure causes a jam error, and the 2nd failure causes this
760 B
SC code.
Punch HP sensor disconnected, defective
Punch motor disconnected or defective
Punch motor overload due to obstruction
761 B Finisher folder plate motor error
The folder plate moves but is not detected at the home position within the
specified time.
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
SM 4-33
SC Tables: SC7xx -2
D009/D011/D012/D013