Sp4-Xxx: Scanner-1 - Ricoh D009 Service Manual

SP4-xxx: Scanner-1

5.9 SP4-XXX: SCANNER-1
Scanner Sub Scan Magnification ADJ
Adjusts the magnification of the sub scan direction during scanning.
4008*
Changing this value changes the scanner motor speed. Press
±.
[–1 to 1 / 0 / 0.1% ]
Scanner Leading Edge Registration ADJ
Adjusts the leading edge registration for scanning. Press
4010*
[–2 to 2 / 0 / 0.1 mm ]
As you enter a negative value, the image moves toward the leading edge.
Scanner Side-to-Side Registration ADJ
Adjusts side-to-side registration for scanning. Press
CS: [–2.5 to 2.5 / 0 / 0.1 mm ]
4011*
MS: [–4.2 to 4.2 / 0 / 0.1 mm ]
As you enter negative values, the image will disappear at the left, and as
you enter positive values, the image will appear at the left.
Scanner Erase Margin: Scale
Adjusts scanning margins for the leading and trailing edges (sub scan) and
right and left edge (main scan).
4012*
001 Book: Leading Edge
D009/D011/D012/D013
Do not adjust unless the customer desires a scanner margin
greater than the printer margin.
These settings are adjusted to erase shadows caused by the gap
between the original and the scale of the scanner unit.
[0 to 3 / 1 / 0.1 mm]
5-40
to toggle
to toggle ±.
to toggle ±.
SM