Ricoh D009 Service Manual page 933

Communication Switch 0E [SP No. 1-104-015]
No FUNCTION
Minimum interval between
0-7
automatic dialing attempts
Communication Switch 0F – Not used (do not change the settings.)
Communication Switch 10 [SP No. 1-104-017]
No FUNCTION
Memory transmission:
Maximum number of dialing
0-7
attempts to the same
destination
Communication Switch 11 – Not used (do not change the settings.)
Communication Switch 12 [SP No. 1-104-019]
No FUNCTION
Memory transmission: Interval
0-7 between dialing attempts to
the same destination
SM
any fax messages.
If this setting is kept at 0, the machine will detect
ringing signals and go into receive mode even if
there is no memory available. This will result in
communication failure.
COMMENTS
06 to FF (Hex), unit = 2 s
(e.g., 06(H) = 12 s)
This value is the minimum time that the machine
waits before it dials the next destination.
COMMENTS
01 – FE (Hex) times
COMMENTS
01 – FF (Hex) minutes
87
Bit Switches
D346