Installation Procedure - Ricoh D009 Service Manual

HDD Option (D362, only for D009/D012)

1.19.2 INSTALLATION PROCEDURE

1. Remove the controller board [1] (
2. Install the HDD unit [2] in the controller board (
3. Reinstall the controller board in the machine.
4. Remove the dummy keytops (top and second from the top).
5. Install the copy and document server keytops.
After Installing the HDD
1. Do SP5832-001 to format the hard disk.
2. Do SP5853-001 to copy the preset stamp data from the firmware to the hard disk.
3. Do SP5846-040 to copy the address book to the hard disk from the controller board.
4. Do SP5846-041 to let the user get access to the address book.
5. Turn the main power switch off/on.
D009/D011/D012/D013
x 2).
x 3).
1-70 SM