Ricoh D009 Service Manual page 479

Copy resolution settings are fixed so they are not counted.
The Fax application does not allow finely-adjusted resolution settings so no count is
done for the Fax application.
8381 T:Total PrtPGS
8382 C:Total PrtPGS
8383 F:Total PrtPGS
8384 P:Total PrtPGS
8385 S:Total PrtPGS
8386 L:Total PrtPGS
8387 O:Total PrtPGS
When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
When several documents are merged for a print job, the number of pages stored are
counted for the application that stored them.
These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
Blank pages in a duplex printing job.
Blank pages inserted as document covers, chapter title sheets, and slip sheets.
Reports printed to confirm counts.
All reports done in the service mode (service summaries, engine maintenance reports,
etc.)
Test prints for machine image adjustment.
Error notification reports.
Partially printed pages as the result of a copier jam.
LSize PrtPGS
8391
These SPs count pages printed on paper sizes A3/DLT and larger.
Note: In addition to being displayed in the SMC Report, these counters are
SM
These SPs count the number of pages printed by
the customer. The counter for the application used
for storing the pages increments.
[0 to 9999999 / 0 / 1]
The L: counter counts the number of pages stored
from within the document server mode screen at
the operation panel. Pages stored with the Store
File button from within the Copy mode screen go to
the C: counter.
[0 to 9999999 / 0 / 1]
5-193
SP8-xxx: Data Log2-3
D009/D011/D012/D013