Ricoh D009 Service Manual page 75

4. Attach the cushion [2] to the finisher.
Make sure that the cushion is placed within 0 to 1 mm from the edge of the
cover.
5. Install the ground plate [3] on the finisher (
6. Attach the rear joint bracket [4] (
7. Attach the front joint bracket [5] and the holder bracket [6] (
Holder bracket [6] must be placed outside the front joint bracket [5]. This
bracket is provided with the Bridge Unit (D386).
SM
2000/3000-Sheet Finishers (B804/B805)
x 2; M3 x 6).
x 2; M4 x 14).
1-41
x 2; M4 x 14).
D009/D011/D012/D013