Safety Notices - Ricoh D009 Service Manual

Hide thumbs Also See for D009:
Table of Contents

Advertisement

Read This First

Safety Notices

Important Safety Notices
Prevention of Physical Injury
1.
Before disassembling or assembling parts of the copier and peripherals, make sure that
the copier power cord is unplugged.
2.
The wall outlet should be near the copier and easily accessible.
3.
Note that some components of the copier and the paper tray unit are supplied with
electrical voltage even if the main power switch is turned off.
4.
If any adjustment or operation check has to be made with exterior covers off or open
while the main switch is turned on, keep hands away from electrified or mechanically
driven components.
5.
If the Start key is pressed before the copier completes the warm-up period (the Start key
starts blinking red and green alternatively), keep hands away from the mechanical and
the electrical components as the copier starts making copies as soon as the warm-up
period is completed.
1.
The inside and the metal parts of the fusing unit become extremely hot while the copier
is operating. Be careful to avoid touching those components with your bare hands.
To prevent a fire or explosion, keep the machine away from flammable liquids,
gases, and aerosols.
Health Safety Conditions
1.
Toner and developer are non-toxic, but if you get either of them in your eyes by accident,
it may cause temporary eye discomfort. Immediately wash eyes with plenty of water. If
unsuccessful, get medical attention.
2.
This machine, which uses a high voltage power source, can generate ozone gas. High
ozone density is harmful to human health. Therefore, the machine must be installed in a
well-ventilated room.
Observance of Electrical Safety Standards
1.
This machine and its peripherals must be serviced by a customer service representative
who has completed the training course on those models.
2.
The NVRAM on the system control board has a lithium battery which can explode if
replaced incorrectly. Replace the NVRAM only with an identical one. The manufacturer
recommends replacing the entire NVRAM. Do not recharge or burn this battery. Used

Advertisement

Table of Contents
loading

This manual is also suitable for:

D011D012D013

Table of Contents