Communication Switches - Ricoh D009 Service Manual

Bit Switches
among separated pages
(Page Separation)
0: ON
1: OFF
Printer Switch 0F [SP No. 1-103-016]
No FUNCTION
Smoothing feature
Bit 1: 0 Bit 0: 0 = OFF
0-1 Bit 1: 0 Bit 0: 1 = OFF
Bit 1: 1 Bit 0: 0 = ON
Bit 1: 1 Bit 0: 1 = Not used
Duplex printing
2 0: OFF
1: ON
Binding direction for Duplex
printing
3
0: Left binding
1: Top binding
4-7 Not used

4.3.4 COMMUNICATION SWITCHES

Communication Switch 00 [SP No. 1-104-001]
No FUNCTION
Compression modes available
in receive mode
0-1 Bit 1: 0 Bit 0: 0 = MH only
Bit 1: 0 Bit 0: 1 = MH/MR
Bit 1: 1 Bit 0: 0 = MH/MR/MMR
D346
pages are reduced with the same reduction ratio.
1: Only the last page is reduced to fit the selected
paper size when page separation has taken place.
Other pages are printed without reduction.
COMMENTS
(0, 0) (0, 1): Disable smoothing if the machine
receives halftone images from other
manufacturers fax machines frequently.
1: The machine always prints received fax
messages in duplex printing mode:
0: Sets the binding for the left edge of the stack.
1: Sets the binding for the top of the stack.
Do not change the settings.
COMMENTS
These bits determine the compression capabilities
to be declared in phase B (handshaking) of the
T.30 protocol.
82 SM