Ricoh D009 Service Manual page 327

002 Book: Trailing Edge
003 Book: Left
004 Book: Right
005 ADF: Leading Edge
007 ADF: Right
008 ADF: Left
Scanner Free Run
4013
Performs a scanner free run with the exposure lamp on or off.
001 Lamp: ON
002 Lamp: OFF
4014 Scanner Free Run
001 HP Detection Enable
002 HP Detection Disable
ADF Scan Glass Dust Check
This function checks the narrow scanning glass of the ADF for dust that can
4020*
cause black lines in copies. If dust is detected a system banner message is
displayed, but processing does not stop.
Check On/Off Change
Issues a warning if there is dust on the narrow scanning glass of the ADF
when the original size is detected before a job starts. This function can
001
detect dust on the white plate above the scanning glass, as well as dust on
the glass. Sensitivity of the level of detection is adjusted with SP4020-2.
[0 to 1 / 0 / 1]
0: Off. No dust warning.
SM
[0 to 3 / 0 / 0.1 mm]
[0 to 3 / 1 / 0.1 mm]
[0 to 3 / 0 / 0.1 mm]
[0 to 3 / 0 / 0.1 mm]
[0 to 3 / 0 / 0.1 mm]
[0 to 3 / 0 / 0.1 mm]
[0 to 1 / 0 / 1]
0=Off, 1=On
Scanner free run with HP sensor check.
Scanner free run without HP sensor check.
5-41
SP4-xxx: Scanner-1
D009/D011/D012/D013