Ambient Dust:
1.
Avoid areas exposed to sudden temperature changes:
1) Areas directly exposed to cool air from an air conditioner.
2) Areas directly exposed to heat from a heater.
2.
Do not place the machine where it will be exposed to corrosive gases.
3.
Do not install the machine at any location over 2,000 m (6,500 ft.) above sea level.
4.
Place the main machine on a strong and level base. Inclination on any side should
be no more than 5 mm (0.2").
5.
Do not place the machine where it may be subjected to strong vibrations.
1.1.2 MACHINE LEVEL
Front to back:
Within 5 mm (0.2") of level
Right to left:
Within 5 mm (0.2") of level
1.1.3 MINIMUM SPACE REQUIREMENTS
Place the main machine near the power source, providing clearance as shown:
SM
Less than 0.10 mg/m3 (2.7 x 10/6 oz/yd3)
1-3
Installation Requirements
A: Front: >75 cm (29.6")
B: Left: > 10 cm (4")
C: Rear: > 10 cm (4")
D: Right > 55 cm (21.7")
The 75 cm (29.6")
recommended for the space
at the front is for pulling out
the paper tray only. If the
operator stands at the front
of the main machine, more
space is required.
D009/D011/D012/D013