Ricoh D009 Service Manual page 379

002 TRAY2:A3
003 TRAY2:A4SEF
Input Check
5803
Displays the signals received from sensors and switches.
( Section 5.25 "Input Check - 1")
Output Check
5804
Turns on the electrical components individually for test purposes. ( Section
5.25 "Input Check - 1")
SC Reset
5810
Fusing SC Reset
Machine No. Setting (DFU)
This SP presents the screen used to enter the 11-digit number of the
5811*
machine. The allowed entries are "A" to "Z" and "0" to "9". The setting is
done at the factory, and should not be changed in the field.
5812* Service Tel. No. Setting
001 Service
002 Facsimile
003 Supply
SM
-
-
Resets all level A service call conditions, such as
fusing errors. To clear the service call, touch
"Execute" on the LCD, then turn the main power
switch off/on.
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
Use this to input the fax number of the CE printed on the
Counter Report (UP mode).
Inputs the telephone number of the supplier displayed on the
5-93
SP5-xxx: Mode-2
Code Set
D009/D011/D012/D013