ECM during transmission
Bit 7: 0, Bit 6: 0 = Off
6-7
Bit 7: 0, Bit 6: 1 = On
Bit 7: 1, Bit 6: 0 = Not used
Bit 7: 1, Bit 6: 1 = Disabled
Switch 04 - Not used (do not change the settings)
Switch 05 - Not used (do not change the settings)
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)
Switch 09 - Not used (do not change the settings)
E-mail Parameters
The initial settings of the following e-mail parameters are all "0" (all parameters disabled).
Switch 00
No
FUNCTION
MH Compression mode
for e-mail attachments
0
0: Off
1: On
MR Compression mode
for e-mail attachments
1
0: Off
1: On
SM
Dedicated Transmission Parameters
For example, if ECM is switched on but is not
wanted when sending to a particular terminal, use
the (0, 0) setting.
V.8/V.34 protocol and JBIG compression
are automatically disabled if ECM is
disabled.
If the setting is "Disabled", the bit switch
setting is used.
COMMENTS
Switches MH compression on and off for files
attached to e-mails for sending.
Switches MR compression on and off for files
attached to e-mails for sending.
137
D346