Leading Edge: 2nd Side
Adjusts the transfer current for copying at leading edge the second side of
004
the paper.
Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
By-pass: Image Area
005 Adjusts the transfer current for copying from the by-pass tray.
If the user normally feeds thicker paper from the bypass tray, use a higher
setting.
By-pass: Leading Edge
Adjusts the transfer current for copying at the leading edge of paper fed
006
from the by-pass tray.
Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
No Image Area
008
Adjusts the transfer current for copying.
SM
[10 to 100 / 20 / 1μA ]
[10 to 100 / 35 / 1μA ]
[10 to 100 / 20 / 1μA ]
[10 to 100 / 15 / 1μA ]
5-27
SP2-xxx: Drum-1
D009/D011/D012/D013