Connecting Procedure for Mainframe
1.7 CONNECTING PROCEDURE FOR MAINFRAME
1. Controller box stay [1] (
2. Open the IOB bracket [2] (
cable x 1,
x 1).
3. Install the core [3] (TFC16816) in
the harness of CN510 (on the IPU)
and the core [4] (RFC-8) in the
harness of CN540 (on the MB).
4. Close the IOB bracket [2] (
flat cable x 1,
5. Reinstall the controller box stay [1]
(
x 4).
6. Install the core [5] (RFC-5) in the
brown and red harnesses of CN201
(on the IOB).
SM
x 4)
x 5, flat
x 5,
x 1).
25
1
2
[1]
[2]
B222R109.WMF
B838R941.PNG
B838R942.PNG
B838