Installing The Sae Board Through A Network Server - Huawei AR1200 Series Usage Manual

Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide
Figure 5-3 Adjusting the boot priority of multiple USB storage devices
Step 6 Press F4 to save configurations and exit.
Step 7 Reboot the SAE board.
The board starts from the preset USB storage device and the operating system installation page
is displayed.
Step 8 Install the operating system as prompted.
----End

5.3 Installing the SAE Board Through a Network Server

This section describes how to set the boot priority in the BIOS system and install the operating
system through the preboot execution environment (PXE) server.
Issue 02 (2012-08-30)
NOTE
Ensure that the operating system installation program is stored in the USB storage device.
To install Windows XP or Linux with kernel version earlier than 2.6.19, change the SATA mode to IDE.
By default, the SATA mode is AHCI.
To change the SATA mode to IDE, enter the BIOS menu, choose Advanced, and set SATA Mode
Selection to IDE.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Operating System on the SAE Board
18