Display Irf Configuration - H3C MSR Series Command Reference Manual

Auto merge
Table 2 Command output
Field
MemberID
Slot
Role
Priority
CPU-MAC
Description
Auto upgrade
MAC persistent
Auto merge
Related commands

display irf configuration

display irf topology
display irf configuration
Use display irf configuration to display basic IRF settings, including each member's current
member ID, new member ID, and physical interfaces bound to the IRF ports. The new member IDs
take effect at reboot.
: no
Description
IRF member ID:
•
ID of the master is prefixed with an asterisk (*) sign.
•
ID of the device where you are logged in is prefixed with a plus (+)
sign.
MPU slot number.
Role of the MPU in the IRF fabric:
•
Standby—Standby MPU for the global active MPU.
•
Master—Global active MPU.
•
Loading—Standby MPU for the global active MPU. The standby
MPU is loading software images.
IRF member priority.
MAC address of the CPU on the MPU.
Description you have configured for the member device:
•
If no description is configured, this field displays a dashed line
(-----).
•
If the description exceeds the maximum number of characters that
can be displayed, an ellipsis (...) is displayed in place of the
exceeding text. To display the complete description, use the
display current-configuration command.
Status of the software auto-update feature:
•
yes—Enabled. The global active MPU automatically pushes its
software images to the MPUs you are adding to the IRF fabric.
•
no—Disabled. You must manually make sure the joining MPUs use
the same software images as the global active MPU. If the software
images are different, the joining MPUs cannot be added to the IRF
fabric.
IRF bridge MAC persistence setting:
•
6 min—Bridge MAC address of the IRF fabric remains unchanged
for 6 minutes after the address owner leaves.
•
always—Bridge MAC address of the IRF fabric does not change
after the address owner leaves.
•
no—Bridge MAC address of the current master replaces the
original bridge MAC address as soon as the owner of the original
address leaves.
Status of the auto-merge feature:
•
yes—Enabled.
•
no—Disabled.
5