Pci Memory Map; Vme Memory Map; Table 1-4. Hawk Ppc Register Values For Suggested Memory Map - Motorola MVME5100 Programmer's Reference Manual

The following table shows the programmed values for the associated
Hawk PCI Host Bridge Registers for the suggested Processor Memory
Map.
Table 1-4. Hawk PPC Register Values for Suggested Memory
FEFF 0040
FEFF 0044
FEFF 0048
FEFF 004C
FEFF 0050
FEFF 0054
FEFF 0058
FEFF 005C

PCI Memory Map

Following a reset, the Hawk ASIC disable's all PCI slave map decoders.
The MVME5100 is fully capable of supporting both PREP and CHRP PCI
Memory Maps with RAM size limited to 2GB. The default values for the
PCI Slave Image registers, are listed in Chapter 3, PPCBug, of the
MVME5100 Single Board Computer Installation and Use manual.

VME Memory Map

The MVME5100 is fully capable of supporting both the PREP and the
CHRP VME Memory Maps with RAM size limited to 2GB. The default
values for the VME Slave Image registers are listed in Chapter 3, PPCBug,
of the MVME5100 Single Board Computer Installation and Use manual.
http://www.motorola.com/computer/literature
Address Register Name
MSADD0
MSOFF0 & MSATT0
MSADD1
MSOFF1 & MSATT1
MSADD2
MSOFF2 & MSATT2
MSADD3
MSOFF3 & MSATT3
Map
Register Name
X000 F3FF [X:1..8]
0000 00C2
FE00 FE7F
0200 00C0
0000 0000
0000 0000
0000 0000
0000 0000
Memory maps
1
1-7