Motorola MVME5100 Programmer's Reference Manual page 298

MVME5100 VPD Reference Information
B
ID# Size
0F 04
10-
BF
C0-
FE
FF N/A
B-6
Table B-1. VPD Packet Types (Continued)
Description
VPD Revision. A table found later in this section
further describes this packet.
Reserved
User Defined
An example of a user defined packet could be the type
of LCD panel connected in an MPC821 based
application.
Termination Packet (follows the last initialized data
packet)
Notes:
1. Data size varies, depending on the product configuration/type.
2. Integer values are formatted/stored in big-endian byte ordering.
3. This packet may be omitted if the ethernet interface is non-existent,
or the ethernet interface has an associative SROM (e.g.,
DEC21x4x).
4. This packet may contain an additional byte following the address
data. This additional byte indicates the ethernet interface number
and is specified in applications where the host product supports
multiple ethernet interfaces. For each ethernet interface present, the
instance number is incremented by one starting with zero.
Binary
N/A
Computer Group Literature Center Web Site
Data Notes
Type