Hawk Internal Error Interrupt Vector/Priority Register - Motorola MVME5100 Programmer's Reference Manual

Hawk Internal Error Interrupt Vector/Priority Register

Offset
Bit 3 3 2 2
1 0 9 8
Name HAWK INTERNAL ERROR INTERRUPT VECTOR/PRIORITY
Operation
Reset $000
MASK
ACT
SENSE
PRIOR
VECTOR VECTOR. This vector is returned when the Interrupt
http://www.motorola.com/computer/literature
2 2 2 2 2 2 2 2 1
7 6 5 4 3 2 1 0 9
PRIOR
R R/W
MASK. Setting this bit disables any further interrupts
from this source. If the mask bit is cleared, while the bit
associated with this interrupt is set in the IPR, the interrupt
request will be generated.
ACTIVITY. The activity bit indicates that an interrupt has
been requested or that it is in-service. The ACT bit is set
to one when its associated bit in the Interrupt Pending
Register or In-Service Register is set.
SENSE. This bit sets the sense for Hawk's internal error
interrupt. It is hardwired to 1 to enable active low level
sensitive interrupts.
PRIORITY. Interrupt priority 0 is the lowest and 15 is the
highest. Note that a priority level of 0 will not enable
interrupts.
Acknowledge register is examined upon acknowledgment
of the interrupt associated with this vector.
$10200
1 1 1 1 1 1 1 1 1
8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
R
$0 $00
Registers
2
VECTOR
R/W
$00
2-125