Table 3-10. Block_A/B/C/D/E/F/G/H Configurations - Motorola MVME5100 Programmer's Reference Manual

System Memory Controller (SMC)
3
3-42

Table 3-10. Block_A/B/C/D/E/F/G/H Configurations

ram a-h Component
siz0-3 Configuration
%0000 -
%0001 4Mx16
%0010 8Mx8
%0011 8Mx16
%0100 16Mx4
%0101 16Mx8
%0110 16Mx16
%0111 32Mx4
%1000 32Mx8
%1001 64Mx4
%1010 Reserved
-
%1111
Notes 1. All SDRAM components should be organized with 4
internal banks.
2. When DIMMs are used, the Component Configuration
refers to the configuration of the devices used on the DIMMs.
3. It is important that all of the ram a/b/c/d/e/f/g/h siz0-3 bits be
set to accurately match the actual size of their corresponding
blocks. This includes clearing them to binary 00000 if their
corresponding blocks are not present. Failure to do so will cause
problems with addressing and with scrub logging.
Number of Block
SDRAM SIZE
Components
In the Block
- 0MBytes
5 32MBytes
9 64MBytes
5 64MBytes
18 128MBytes
9 128MBytes
5 128MBytes
18 256MBytes
9 256MBytes
18 512MBytes
- -
Computer Group Literature Center Web Site
SDRAM
Technology
-
64Mbit
64Mbit
128Mbit
64Mbit
128Mbit
256Mbit
128Mbit
256Mbit
256Mbit
-