Motorola MVME5100 Programmer's Reference Manual page 297

Table B-1. VPD Packet Types (Continued)
ID# Size
06 04 MPU External Clock Frequency in Hertz (e.g.,
100,000,000 decimal, etc.).
This is also called the local processor bus frequency.
07 04 Reference Clock Frequency in Hertz (e.g., 32,768
decimal, etc.). This value is the frequency of the
crystal driving the OSCM.
08 06 Ethernet Address (e.g., 08003E26A475, etc.)
09 Variable MPU Type (e.g., 601, 602, 603, 604, 750, 801, 821,
823, 860, 860DC, 860DE, 860DH, 860EN, 860MH,
etc.)
0A 04 EEPROM CRC
This packet is optional. This packet would be utilized
in environments where CRC protection is required.
When computing the CRC this field (i.e., 4 bytes) is
set to zero.
This CRC only covers the range as specified the size
field.
0B 0C FLASH Memory Configuration
A table found later in this document further describes
this packet.
0C TBD VLSI Device Revisions/Versions
0D 04 Host PCI-Bus Clock Frequency in Hertz (e.g.,
33,333,333 decimal, etc.)
0E 0F L2 Cache Configuration
A table found later in this document further describes
this packet.
http://www.motorola.com/computer/literature
Vital Product Data (VPD) Introduction
Description Data Notes
Type
Integer (4- 2
byte)
Integer (4- 2
byte)
Binary 3, 4
ASCII 1
Integer (4- 2
byte)
Binary
Binary
Integer (4- 2
byte)
Binary
B-5
B