Steering Stem - Honda SH300 2006 Manual

STEERING STEM

REMOVAL
• Always replace the bearings and races as a set.
Remove the following:
– front upper cover (page 3-9)
– front handlebar cover (page 3-14)
– rear handlebar cover (page 3-14)
– front inner cover (page 3-10)
– fork (page 15-12)
– handlebar (page 15-20)
Remove the bolts and brake hose clamps.
Hold the steering stem adjusting nut using the pin
spanner then loosen the steering stem lock nut
using the socket wrench.
TOOLS:
Socket wrench
Pin spanner
Remove the steering stem lock nut.
Hold the steering stem and loosen the steering stem
adjusting nut using the pin spanner.
TOOL:
Pin spanner
Remove the steering stem adjusting nut while sup-
porting the steering stem.
FRONT WHEEL/SUSPENSION/STEERING
BOLT/CLAMP
07916-KM10000
07702-0020001
ADJUSTING NUT
07702-0020001
ADJUSTING NUT
BOLT/CLAMP
SOCKET WRENCH
LOCK NUT
PIN SPANNER
PIN SPANNER
15-27