LIGHTS/METER/SWITCHES
REMOVAL/INSTALLATION
Remove the headlight unit (page 20-6).
Release the immobilizer receiver 4P (Natural) and
ignition switch 2P (Blown) connectors from the
meter stay.
Disconnect the ignition switch 2P (Brown) connec
tor.
Remove the bolts and ignition switch.
Install the ignition switch to the top bridge.
Tighten new ignition switch mounting bolts to the
specified torque.
TORQUE: 25 N•m (2.5 kgf•m, 18 lbf . ft)
Install the removed parts in the reverse order of
removal.
HANDLEBAR SWITCHES
Remove the headlight unit (page 20-6).
Disconnect the handlebar switch {Blue and Gray)
connectors.
20-20
---------,
RIGHT HANDLEBAR SWITCH
14P {Blue) CONNECTOR
LEFT HANDLEBAR SWITCH10P
- -. ( G ray )E£._ NN EC T O _ R _
_ _ __.