Motorola DSP96002 User Manual page 431

See restrictions in Section A.10.6 concerning Rn, Mn, and Nn registers as a destination.
CCR Condition Codes:
C - Not affected.
V - Not affected.
Z - Not affected.
N - Not affected.
I - Not affected.
LR - Not affected.
–
R - Not affected.
A - Not affected.
ER Status Bits:
INX - Not affected.
DZ - Not affected.
UNF - Not affected.
OVFD - Not affected.
OPERR - Not affected.
SNAN - Not affected.
NAN - Not affected.
UNCC - Set if NAN is set and a non-aware floating-point condition is tested ("cc" conditions
marked "YES" above). Not affected otherwise.
IER Flags:
SINX - Not affected.
SDZ - Not affected.
SUNF - Not affected.
SOVF - Not affected.
SIOP - Set if NAN is set and a non-aware floating-point condition is tested ("cc" conditions
marked "YES" above). Not affected otherwise.
Instruction Format - Opcode-operands: S,D
31
0000 011c
MOTOROLA
CAUTION
FFcc
FFcc
cccc tttT
DSP96002 USER'S MANUAL
14 13
uu uuuu
0
uuuu uuuu
A - 243