Motorola DSP96002 User Manual page 446

MOVE(I)
Operation:
#xx D
Description:
The 16-bit immediate short operand is sign extended to a word operand and is stored in the destination
register D. Care should be taken if the specified destination register is D0.S-D9.S, since there is no special
formatting for short floating-point data and the sign extended immediate short operand may produce small
positive denormalized numbers or a negative NANs. See Section A.10 for restrictions that apply to this
instruction. Note that if D is SSM, the SP will be preincremented by one.
See restrictions in Section A.10.6 concerning Rn, Mn, and Nn registers as a
destination.
CCR Condition Codes:
For destination operand SR:
C - Set according to bit 0 of the source operand.
V - Set according to bit 1 of the source operand.
Z - Set according to bit 2 of the source operand.
N - Set according to bit 3 of the source operand.
I - Set according to bit 4 of the source operand.
LR - Set according to bit 5 of the source operand.
–
R - Set according to bit 6 of the source operand.
A - Set according to bit 7 of the source operand.
For destination operands other than SR:
C - Not affected.
V - Not affected.
Z - Not affected.
N - Not affected.
I - Not affected.
LR - Not affected.
–
R - Not affected.
A - Not affected.
A - 258
Immediate Short Data Move
DSP96002 USER'S MANUAL
Assembler Syntax:
MOVE(I) #Data,D
CAUTION
MOVE(I)
MOTOROLA